PECHORIN'S
audio and video equipment discussion forum home   globalmediapro eshop
.
Post new message


Start
Up





Professional video and audio online store

Professional video and
audio equipment
online store


Globalmediapro eShop

Error Codes Assistance

Stacy Sample - 22nd Jan 2004 19:31

Assistance for Error Codes

If anyone is having any kind of Error code, clean head icon or any other concern, contact me first before assuming you have a problem. My e-mail is Ssample@jvc.com.

I am knowledgeable and have helped many people past their error codes without service. Several things can cause error codes and I would be more than happy to assist you in determining if you do indeed have a problem and what options you have available.

Please refer to this site if you contact me. Thank you.

Stacy Sample
Service Coordinator
Houston, Texas

Reply

 

Pages:   « 1 2 3 82 83 84 85 86 87 88 89 90 91 92 162 163 164 »

  • Re: Error Codes Assistance R.Behm - 6th Dec 2006 7:07
    I am getting an error code C:31:30 on my Sony DVR-TRV11. The mini dv film gets
    stuck and the film door sometimes does not close or open.
    Very frustrating when I need to video and the thing does not work!
    I have had this repaired but is happening again.
    Any suggestions

    • Same Bri - 16th Jan 2007 0:15
      Hey. I'm having the same problem. Right now I'm trying to get my miniDV film out of my camcorder but I'm not having any luck. I'm upset because it was a Christmas gift from my grandparents. How did you fix it? Did you take it back to the store and have them fix it for you? This is really frustrating... Bri

  • Re: Error Codes Assistance
    Kalervo Karppinen
    - 8th Dec 2006 14:56
    I have Technics stero system SC-CA 1080 and it has worked fine many years untill now.Device shuts off after little more volume and error code F61 appears for few seconds.I power system on again and turn little bit more volume, same result again.
    Fan does work simultaneously with bass (not with how hot heat element is, strange solution).I have checked transistors, diodes and weldings, do I have to change expensive audio power module RSM 3403?
    With low wolume it works just fine, only moderate/hard volume gets out these symptons.
    Look forward to hear you.K.K.

    • Re[2]: Error Codes Assistance
      Jens
      - 2nd Jun 2007 17:16
      In my case, this solved the problem. I got the new RSN 3403 from a other SC 1080 which i buyed on ebay (it was marked as defect, so i got it for a few bucks). Regards from germany, Jens

  • Re: Error Codes Assistance Dean Harrison - 9th Dec 2006 23:24
    Please Help. I have a Sony webcam and a error code c31:32 keeps coming up.
    Thanx Dean

    • Re[2]: Error Codes Assistance
      Lance
      - 22nd Dec 2006 14:12
      Dean, remove battery and tape, slap unit firmly a few times. Put everything back in and it will work. Just fixed mine like this.

  • Re: Error Codes Assistance
    M Riyaz Ismail
    - 10th Dec 2006 23:24
    Hi,
    I got your contact info from pechorin.com. I have a Sony VCR "SLV 750HF". This VCR was in storage for about 2 years and since bring it back home I've been getting an error (L 30 01) when I play any tape. The FastForward and Rewind seem to work fine. The hi-speed rewind probably doesn't work -- it operates as regular rewind. When I hit play the tape loads the right side motor rotates until the slack is removed but then it stops. the left side wheel doesn't turn at all and then tape unloads and stops with the error code L 30 01. I am not sure what the problem. Could you please suggest what should I look for.

    Thanks a lot...
    riyaz.

  • Re: Error Codes Assistance
    Pacific Turmawan
    - 11th Dec 2006 9:07
    Dear sir..

    I do have a problem with my panasonic dvd portabel 9" LCD DVD-LX8.. The code is "Error H02" and I don't what it means..

    Please Help..

    Thanks..

  • Re: Error Codes Assistance
    Iralda
    - 11th Dec 2006 23:50
    I have a STR-DE825 Receiver and when I turn it on after 3 or 4 seconds it displays "PROTECTOR" and after another 4 seconds it smells like something it's burning. I opened it up and it looks like smoke comes from the board on the bottom and there are 2 or 3 i think they are resistors that are brown.

  • Re: Error Codes Assistance j - 12th Dec 2006 21:40
    my sony pfm-500a2wu is giving me the error code 12&22 any advice would be greatly appreciated thanks

  • Re: Error Codes Assistance
    simon
    - 16th Dec 2006 13:29
    I have an error code on my hp photosmart r717. It is an number string 5555AAAA-437B-182-203. It comes up when you powerup the camera. Then comes the error code and the camera hangs.

    • Re[2]: Error Codes Assistance
      luni
      - 12th Oct 2008 17:15
      dear Simon, I have the same problem, have you successfully resolved the problem? can you give some hints to me?

  • Re: Error Codes Assistance
    Aaron
    - 16th Dec 2006 20:57
    Hi there. Our panasonic SA-AK600 5 disk shelf top stereo just stopped while it was playing and gave us a fault code F61. We have power, but it will not do anything but show us the code. Any suggestions?

  • Re: Error Codes Assistance
    Robert Dhillon
    - 16th Dec 2006 21:27
    Hi, I have a sharp Mini DV ViewcamZ. Im having trouble with inserting tape into the camera. Getting error message "DEW". It will not close with tape but will close without tape. The manual says moisture, we tried to leave it open to dry out but the problem still exists. Please help. Thank you for any assistance.

Pages:   « 1 2 3 82 83 84 85 86 87 88 89 90 91 92 162 163 164 »



Pages
 

   LOGIN


© 2001-2004 - Pechorin's - Contact Us
Pechorin's does not take responsibility for the content of the messages published in the Forum.

RSS feed
Report bad messages and bugs