JVC service or questions

Assistance with JVC product

If anyone has a question regarding a problem with thier JVC product (error codes, safeguard mode etc) write me for troubleshooting assistance. Please provide your model # if available and note this site so I can assist you better.

Stacy Sample
JVC Service & Engineering
Houston, Texas

Reply

• Re: JVC service or questions Lou Medeiros - 14th Aug 2004 4:25
  I bought a JVC GR D30U digital video camera. In playback the sound cuts in and out. I have cleaned it repeatedly with no help. I would appreciate any help you could give me. Thank You.
  
  
  • Re[2]: JVC service or questions Mike - 6th Jan 2006 2:20
    Had a similar problem on a JVC GR-D70U camera. Found that if I used JVC tapes the audio was fine, if I used other tapes Sony or Panasonic then the sound would cut in and out. Not sure if you have the same problem but it might be something to try.
    
    
• Re: JVC service or questions Hamit Ozcetin - 14th Aug 2004 18:36
  My JVC camcorder mini DV 16x 700 x digital broke dowm because little screw came out of it. It caused shortc circuit or something like that.
  I can not turn it on.I have my tape in it. I can not take it back as well.I live in oak creek, WI
  Thanks
  
  
• Re: JVC service or questions Ronald Nieuwenhuis - 15th Aug 2004 12:11
  Hello,
  I have a JVC GR-DVL-157eg
  The failure is E04, the system stopped.
  What is the reason and how do I have to solve the problem.
  Regards Ronald Nieuwenhuis
  
  
• Re: JVC service or questions Rajiv Ranjan - 15th Aug 2004 13:11
  I bought one camrecorder GR DX25E from Enshede, the Netherlands on 17th April 2004,Now I am in India currently the eject function is not working and there is also some problem with LCD,what is the probable problem,and how it can be repaired.
  RAJIV
  
  
• Re: JVC service or questions Jerome House - 16th Aug 2004 0:02
  Model AV-36D203 2yrs. old
  light flashing and no power
  can you assist me?
  
  
• Re: JVC service or questions
  lojet flipz
  - 16th Aug 2004 1:52
  jvc grd30u mini cam corder
  problem...viewfinder has no image and lcd says lenscap is on when it's off. Thanks
  
  
  • Re: Re: JVC service or questions Mike - 22nd Dec 2004 0:10
    Did you ever get an answer for this Mike
    
    
  • Re: Re: JVC service or questions James Herrmann - 22nd Dec 2004 23:12
    I have the same problem I tried to reset it by removing and replacing the battery I had it at the service center 5 months ago for the same problem. Did you fix this problem
    
    
  • Re[2]: JVC service or questions CHARLOTTE - 19th Sep 2005 21:15
    I HAVE THE SAME PROBLEM WITH SAME MODEL
    
    
  • Re[2]: JVC service or questions Mike2 - 6th Jan 2006 2:22
    Have a GRD70U with the exact same problem. Did you find out what the problem was?
    
    
    • Re[3]: JVC service or questions Chuck - 15th Jan 2006 20:32
      MyGR-D30 is doing the same. Any fix?
      
        See 1 more comment...
      
      
• Re: JVC service or questions
  Joe Waters
  - 16th Aug 2004 2:01
  I have a JVC D series 27" TV. It's not quite 2 years old. It's developed a very annoying problem in the last few days. Whenever the is a pure white background, it buzzes REALLY LOUD and there's a green smear washing onto the left side of any non-white element in the picture. Visually, it's mildly annoying, but the volume from the buzz is intolerable. Is there anything I can do about this, aside from paying someone to fix it?
  
  
• Re: JVC service or questions John Beltran - 16th Aug 2004 17:33
  Our radio station uses a JVC digital video camera (GR-DVL-300) and it has begun to show an E06 message (Unit in Safeguard mode) because the mini DVD digital cassette is getting eaten up or twisted inside the camera even before it's ready to record.
  What can you suggest to fix this problem?
  
  
• Re: JVC service or questions
  Scott Fraser
  - 17th Aug 2004 0:26
  I have a JVC model AV-32985 manuf. 1998. Today the TV would not power on and the on-timer LED was flashing. I unplugged the TV for a while and now the LED is off but the TV still does not power on. I am an Electronic Technologist and was wondering if there was a common problem that I could repair myself.
  
  
• Re: JVC service or questions
  Richard Lloyd
  - 17th Aug 2004 0:35
  I have a JVC GR-DVX4 camcorder which has just started showing E02 error code
  Do you no what it means?
  Richard