JVC service or questions

Assistance with JVC product

If anyone has a question regarding a problem with thier JVC product (error codes, safeguard mode etc) write me for troubleshooting assistance. Please provide your model # if available and note this site so I can assist you better.

Stacy Sample
JVC Service & Engineering
Houston, Texas

Reply

• Re: JVC service or questions CHRIS BRYANT - 24th Aug 2004 20:23
  i have great picture but no sound on my JVC AV25SX1EK TV set
  
  
• 28" JVC TV sound trouble jeff - 24th Aug 2004 22:19
  I have a JVC 28" color TV, model number AV-F29MX3, that was built in May, 2001. I'm having troublewith the sound. Occasionally, the sound on the TV will go completely out, sometimes, fading back in, sometimes not. If I turn the TV off though, the sound will come right back on. Is anyone else having this problem? What's the fix?
  
  
• Re: JVC service or questions jenneen - 25th Aug 2004 0:58
  I have a JVC KD-S640 cd player in my car. The battery went dead and now that it's recharged, the player gives me an Error 10 message. Help?
  
  
  • Re: Re: JVC service or questions Kirk - 4th Dec 2004 19:29
    the exact same thing happend to me only I have an 04 error instead of a 10. How did you fix it?
    
    
  • Re[2]: JVC service or questions
    Jim
    - 4th Aug 2005 21:41
    The same thing also happened to me to. I also get an error 04 Please let me know if anyone knows how to fix this problem
    
    
• Re: JVC service or questions Janene - 25th Aug 2004 5:14
  I have a JVC GR-DVM5. When I try to play, rewind or fastforward a tape, I get an E04 message and the camera freezes. If I reset or turn it off, it looks okay until I try to play again.
  
  
• Re: JVC service or questions Robert - 25th Aug 2004 16:30
  hello there! my cam won't go out of safeguard mode. I tried reataching the battery like it says but is says the same. Please help. I have a GR-DVL557E (thats what is says in the bottom)
  
  
• Re: JVC service or questions wilson pablo - 25th Aug 2004 20:05
  During an analising I find a transistor in which there`s a number impressed in it body : 25.
  My doubt is: What kind of transistor is it?
  Anyone can answer my question?
  Since already : thanks a lot
  Wilson Pablo in Manaus Amazonas
  
  
• Re: JVC service or questions
  Jeff Larkin
  - 26th Aug 2004 15:02
  I have a JVC TV Model AV-36F702 that will not power up. There is a red LED on the front that blinks, but that is all. Could you please let me know what the possible solutions would be. Thanks for your help.
  
  
  • Re[2]: JVC service or questions
    Manny Amo
    - 15th Feb 2005 22:54
    I have the same problem with my JVC AV-36F702. It will not power up. When I press the power button the red LED on the front of the TV blinks. Please help me fix this.
    
    
    • Re[3]: JVC service or questions
      Steve
      - 29th Mar 2005 2:14
      Manny, read other meesages here about the same problem with similar JVC models. I just became one of the many here who replaced the C926 capacitor for less than $2 and solved the problem.
      
      
• Re: JVC service or questions ken cook - 26th Aug 2004 18:41
  Hi, I am a service tech for the school board of polk county florida. I have a few jvc model rx-6010vbk amps with same problem. the display reads "overload". I have a schematic but it is inadequate. I also can not get any support from jvc because we are not a sevice center. Is this a problem you are familiar with? Have tried the usual trouble shooting to no avail. Are there any service bulletins I can obtain? Thank you for your help.
  Ken Cook
  PCSB
  A/V DEPT.
  note:www.pechorin.com
  
  
• Re: JVC service or questions Luthfie - 27th Aug 2004 3:28
  Hi Stacy,
  could you tell me if its possible to somehow access the information which shows how long (ie.hours) a TV has been used ? FYI the JVC TV model no. : HV29LPZ
  Many thanks.
  
  
  • Re: Re: JVC service or questions Karim - 27th Sep 2004 14:54
    Hi! Did you find any answer to this question?
    
    
• Re: JVC service or questions Sameer - 27th Aug 2004 13:10
  Hi i have a GR-DVM50U and after using it since last 2years i am getting ane04 error, can u tell me what the prob might be, cannot be the tape cause i get the same error even with out the tape.