JVC service or questions

Assistance with JVC product

If anyone has a question regarding a problem with thier JVC product (error codes, safeguard mode etc) write me for troubleshooting assistance. Please provide your model # if available and note this site so I can assist you better.

Stacy Sample
JVC Service & Engineering
Houston, Texas

Reply

• Re: JVC service or questions Amber Lemus - 23rd May 2005 23:51
  I have a JVC VHSC MODEL #GR-SXM260
  WHEN I TURN ON MY UNIT AND START TO RECORD AN ERROR COMES UP IT SAYS
  E03 UNIT IN SAFEGUARD MODE-ROMOVE AND REATTACH BATTERY. WHEN I DO THAT IT STILL COMES UP THE SAME SO I WAS WONDERING IF YOU COULD HELP ME. CAN YOU REPLY AS SOON AS POSSIBLE PLEASE.
  
  THANK YOU,
  AMBAR
  
  
• Re: JVC service or questions
  tammi schnarrs
  - 24th May 2005 1:48
  i have a JVC GR-AXM225 that keeps telling me the lens cover is closed when it is open, can you tell me what is wrong with it please. it worked the last time i used it. thanks for your help.
  
  
• Re: JVC service or questions
  John
  - 24th May 2005 23:27
  I feel bad for I just opened a new thread before noticing this one. I decided to repost my text here and realy I hope u can help me.
  
  JVC Television shuts off or won't start
  John - 24th May 2005 23:21
  This jvc television pissed me off on a monumental scale.
  
  Hello all,
  
  I have a JVC television of the AV-28H35SUE model. It worked fine for a year and a half until today. My television keeps freezing after 2 minuts, i.e. it won't allow you to change to another channel and such. After using the power button to shut off the system my television won't boot until it feels like doing so by its own will.
  
  Does someone recognize this fault? Ideas to fix it?
  
  Kind regards,
  
  John.
  
  
• Re: JVC service or questions
  Kelsi
  - 26th May 2005 3:25
  Please send me instructions on how to set the clock on my JVC car stereo model KD-G200 if possible. Thank you, Kelsi
  
  
  • KD-G200
    Helpful
    - 18th Jun 2005 8:07
    Try this link from JVC.com for manual download. Cut and paste the link to your address bar on your browser. http://books.jvcservice.com/booklist.asp?Model=KD-G200UJ If for some reason you cannot connect to the link -- go to JVC.com > service and support > User Manuals and put in KD-G only. Allow the page to open up for the KD-G models and pick the option for your specific model. Sometime the letters after the model #s may not all display on your product. (see the UJ behind the model # on the link I provided) There is also a KD-G200UC model listed. I am not sure which is which in your case but you can have access to both for download and review on line.
    
    
• Re: JVC service or questions Pamela Moore - 26th May 2005 22:41
  Pechorins Web Site:
  
  I own a JVC model # GR-DVL 120U. After a recent trip to Hawaii,I began to experience the EO 1 error mentioned on the referenced web site. This seems to come and go and has rendered the camera for all intent and purposes useless. Please advise me of any solutions.
  Thanks,
  
  Pam
  
  
  • GR-DVL120U E-01
    Helpful
    - 18th Jun 2005 8:14
    Will the camcorder allow a tape to load and eject? If not, is a tape stuck? The E-01 is an error that may cause a tape to jam inside the unit and make it useless. If a tape will not load easily...don't force it. The unit may need to be looked at or purchase a new one due to prices going down so much. Especially on line. Check out BuyDig.com for new DV models from several manufacturers. I am curious, could the unit have come in direct contact with sand in Hawaii? Sand, gears and components do not get along well and can lead to a mechanical malfunction.
    
    
• Re: JVC service or questions chickrockin - 26th May 2005 23:29
  I need owners/instruction manual for jvc super vhs digital signal processing camcorder model # GR-SXM260U. Hope you can help me...Thanks!
  
  
  • User Manual for GR-SXM260US
    Helpful
    - 18th Jun 2005 8:10
    Try pasting this link to your address browser. It should take you to JVC.com >service and support > user manuals. LINK: http://books.jvcservice.com/booklist.asp?Model=GR-SXM260Us&x=18&y=13
    
    
    • Re: User Manual for GR-SXM260US Travis Wood - 8th May 2006 12:17
      My Video camera will not sense that there is a tape in the camera what should i do.
      
      
  • Re[2]: JVC service or questions
    chris
    - 3rd Dec 2006 3:51
    i need the same thing too..cant anyone help???
    
    
  • Re[2]: JVC service or questions
    chris
    - 3rd Dec 2006 3:52
    I need owners/instruction manual for jvc super vhs digital signal processing camcorder model # GR-SXM260U. Hope you can help me...Thanks!
    
    
• Re: JVC service or questions mike - 27th May 2005 7:09
  i have a jvc gr-d30u camcorder and when i use the night alive and try to record, what i see is mostly clear until i move the camera, then the screen gets really blurry. is there anything i can do to fix it without it being expensive?
  
  
  • Night Alive Function
    Helpful
    - 18th Jun 2005 8:20
    Actually that is normal of this feature. I believe the camcorder is opening it's optical assy all the way for the light to come in as much as possible for the low light recording. If the camcorder is trying to focus on an object and you move the camcorder during this feature the optical assy will go in/out and hunt for what it thinks you are trying to focus on. Your operation manual does hit upon this issue and you may want to re-read it to verify if your camcorder is operating normal. Try going into a fairly dark or unlit room and turn on the feature in automatic and also manual mode. See how it reacts in each mode. Focus on a specific object in the room in each mode. Note the reaction of the unit in each mode and see if you think it is the camcorder failing or normal reaction via the manuals user notes.
    
    
  • Night Alive Function
    Helpful
    - 18th Jun 2005 8:21
    I wanted to add you may experience a "strobe" affect which is also normal for this feature.
    
    
• Re: JVC service or questions Mark V. Glaze - 27th May 2005 19:54
  i have a JVc Gr-D30u ..it will not record but does playback previously recorded tapes. Timages for exposer at the bottom ceter of the LCd keep flashing . Can you point me in the right direction to get it fixed?
  
  
• Re: JVC service or questions udoh alexander idopise - 27th May 2005 21:45
  ple i need the circuit diagram. pls
  
  
• Re: JVC service or questions
  Michael Coriz
  - 28th May 2005 3:30
  My dad just got a JVC model AV-27020 from one of this coustomers and it dosent work. It turns on and there is sound but their is a flat line in the middle of the screen and we dont know what to do to get rid of it. We would love to put it to good use and need some help. Can you help us?