JVC service or questions

Assistance with JVC product

If anyone has a question regarding a problem with thier JVC product (error codes, safeguard mode etc) write me for troubleshooting assistance. Please provide your model # if available and note this site so I can assist you better.

Stacy Sample
JVC Service & Engineering
Houston, Texas

Reply

• Re: JVC service or questions Tammy Lizotte - 26th Apr 2006 11:15
  I borrowed a JVC GR-DVL520U from a friend for a graduate project, but unfortunately I keep getting EO1 error to remove and reattach the battery. HELP. Anything you can share would be much appreciated. Thanks!
  
  
• Re: JVC service or questions Ken Huls - 26th Apr 2006 16:52
  I have a JVC AV-27D104. It has a problem where the "picture" control doesn't adjust making the TV very dark...like looking through fog. I take the back off and it starts working, I put the back back on and it stops working, making the picture dark again. Suspect it is a bad solder joint or cracked run but don't know where to start looking. Any ideas?
  
  Thanks,
  
  Ken
  
  
• Re: JVC service or questions Christopher Philbrick - 26th Apr 2006 23:30
  Hi Stacy,
  
  Please help with an error code 04.
  
  If there is ANY thing that I can do please let me know.
  
  Thanks,
  Christopher
  
  
• Re: JVC service or questions lynn Eardley - 27th Apr 2006 0:21
  I have just purchased a JVC gr-d33. im a little confused because the book is for thegr-d93/73. Can I buy a memory card to take pictures or does this model not take pictures. Thanks
  
  
• Re: JVC service or questions
  Bill
  - 27th Apr 2006 0:25
  I have a JVC iart AV-32F704 model 32 inch flat screen television. It is only a couple years old. One day, it simply had no sound or picture. The power light comes on but I cannot get anything on the screen, including the on-sreen menu or volume bar. Is this just a matter of a blown fuse of some kind? If so, where is the fuse to fix it? Thanks.
  
  
  • Re[2]: JVC service or questions molly - 27th Jun 2006 1:18
    I have the same problems with my JVC AV 32F704, any suggestions. No warning or anything just turned it on one day and the screen is totally black. Any ideas on what the problem is or how much the repairs are?
    
    
  • Re[2]: JVC service or questions
    wes
    - 12th Aug 2006 17:21
    check capacitor c973 in the power supply section. its an electrolitic cap that seems to pop
    
    
• Re: JVC service or questions Scott Gibbons - 27th Apr 2006 4:38
  I bought a car 3 years ago that had a JVC KD-S550 streo/cd player in it. I normaly listen to the radio or my IPOD but the other day I attempted to put a cd in to listen to. After about 5 seconds it ejects the CD. It doesn't sound like it's even trying to read the CD. I've tryed multiple CD's to make sure it wasn't just the one and nothing works. I bought a CD cleaner but 5 seconds after I pop it in it shoots back out. I don't have a manual for the CD player so I'm lost, I would rather not take it to a professional if I can help it. Can you help me?
  
  
  • Re[2]: JVC service or questions Rich Griffin - 15th May 2006 23:13
    My Unit does the same thing,,,I downloaded a manual,Reset it tried everything...but nothing works. If there is a solution to this problem ,,please let me know.
    
    
  • Re[2]: JVC service or questions
    Elly
    - 21st Aug 2006 14:01
    I have also the same problem, do you know already the solution ???
    
    
• Re: JVC service or questions John Romanovsky - 28th Apr 2006 23:12
  I have a 1997 JVC AV-27850 television. It has a red line through the center of the screen. Can you reccomend what part needs to be replaced? I wanted to try and fix this myself without bringing it to a repair shop. Thanks for your help.
  
  John
  
  
• Re: JVC service or questions
  unni nair
  - 29th Apr 2006 14:03
  Hi Stacy
  
  I have a JVC Digital video Camera Model GR-D24EK. I bought it in 2004
  
  Now if I want to record any video Images I am unable to see any picture in the small screen. Instead I am seeing only coloured stripes.
  
  How do I get around it?
  
  Thanks
  
  Unni
  
  
• Re: JVC service or questions
  Telisa
  - 29th Apr 2006 21:10
  My grandfather has a JVC camcorder model #400x. It displays "E07 Unit in safeguard mode" and the tape will not eject. Please advise?
  
  Thanks
  Telisa
  
  
• Re: JVC service or questions
  Deepak Kumar
  - 30th Apr 2006 5:01
  I want to transfer video from my JVC camcorder using firewire cable. I installed JClip videoCapture and Jclip videoProducer on my desknote and connected camcorder using firewire[4-6 pin], however in these s/w camcorder is not detected.
  Input from anyone on how to go about transferring video from GR-DVM70 to computer will be helpful for me. Thanks in advance.
  
  Camcorder Model No: JVC GR-DVM70
  Desknote Model no : A928