JVC service or questions

Assistance with JVC product

If anyone has a question regarding a problem with thier JVC product (error codes, safeguard mode etc) write me for troubleshooting assistance. Please provide your model # if available and note this site so I can assist you better.

Stacy Sample
JVC Service & Engineering
Houston, Texas

Reply

• Re: JVC service or questions alex salinas - 4th Mar 2007 3:45
  i have a jcv kd-s580 an now its just sayon buy like im turning off my car but im trying to play a cd or listen to the radio?
  
  
  • Re[2]: JVC service or questions
    Elissa
    - 15th Aug 2007 2:59
    I had the same problem for a little while. I have noticed when it is really humid out that the thing kind of freaks out. For a little while it would turn off in the middle of playing and then come right back on. Now it wont accept or eject CD's whatsoever.
    
    
• Re: JVC service or questions
  leaann stewart
  - 4th Mar 2007 8:32
  My tv suddenly cut off and would not turn back on. I unplugged it and it sounds like it is trying to come back on and the red light flicks on and off beside what says is the on timer. Is there anything I can do to get it back on or is it time to find a repairman?
  
  
  • Re[2]: JVC service or questions
    JB38
    - 4th Mar 2007 11:42
    It would have been of assistance if you had cared to mention the model number of the TV you are referring to, however nomatter what it is the symptom you mention indicates that the power supply has shut down as a fault was detected so its really a repair job.
    
    
• Re: JVC service or questions PKUMAR - 4th Mar 2007 10:45
  I need USB driver for my JVC camcorder model no# GR-D22U
  
  
• Re: JVC service or questions tessa - 4th Mar 2007 16:41
  i need a driver for jvc gr-d270u. where i can get it? tnx.. need it badly.
  
  
• JVC AV-56WP74
  Wade
  - 4th Mar 2007 17:46
  just changed out the stk392-110 with stk392-150
  
  After Ichanged the stk's the red would jump up and down and the convergance wouldn't stay put. I took the board back out and noticed that only one stk was hot and there are a couple of resitors blown. Do anyone know the values of R862 and R842?
  
  Thanks,
  Wade
  
  
  • Re: JVC AV-56WP74 Frank - 23rd Mar 2007 3:07
    I am in the process of working on my AV-48WP30. I replaced the STK's but found that resistor R862 looks as though it's heat damaged. From what I can tell on my model it's a 1.8 ohm. Since my TV is suffering from the same problem as before I replaced the STK's (the green was severly bowed top and bottom) and this resistor's circuit leads off to the green connector on the board I'm hoping this will be the fix. HTH.
    
    
    • Re[2]: JVC AV-56WP74
      Wade
      - 23rd Mar 2007 13:35
      I have the ohms value. I was wondering about the wattage. I ordered resistors from digikey and they sujested using 3 watt resistors. Replaced the stk chips with the 150's (was 110)replaced the 3 burnt out resistors and tried the tv. Within a few seconds the resistors glowed and burnt out again. Put the old stk chips back in and replaced the resistors again and tried that with the same results. Am going to try 1 watt resistors which I think they are. What do i have to lose? This is a good excuss to get a better tv I think.
      
      
• Re: JVC service or questions Shaun - 4th Mar 2007 18:29
  Hi. I have a JVC GR-D33 camcorder and when I try to record the LCD and view finder is black and states that the lens cap is on however it isn't. The sound records fine but there is no picture. Is there a fix for this? Thank you.
  
  
  • Re[2]: JVC service or questions
    JB38
    - 4th Mar 2007 20:50
    "FULL" info sent via "DIRECT" e-mail which includes details of the procedure used to obtain the free repair provided that you are the original purchaser of the camcorder.
    
    
    • Re[3]: JVC service or questions Sasha - 6th Mar 2007 4:21
      I have the same problem - no picture when I try to record. The camera is relatively new - 2 years or so but we stoppped using it some time ago because we cannot record - any advice? Thank you
      
        See 2 more comments...
      
      
  • Re[2]: JVC service or questions John - 24th Mar 2007 15:02
    I am having the same problem says the lens cap is on but it isn't. I have the MG20U model. Could you e-mail me this info also.
    
    
• Re: JVC service or questions Doug Lloyd - 4th Mar 2007 23:25
  Have a DVL725 and having headcleaning issues. Quite sudden. Going through all of the steps to clean the heads using a purchased dry cleaner but getting nowhere. No getting just a blue screen, instead of the bars over picture.
  
  Would really like to get this product working again. I have not used it much since purchase in 2002, but have been using it more often now...and broke.
  
  Doug
  
  
• Re: JVC service or questions Amanda - 5th Mar 2007 0:20
  I have a JVC model AV-27230.
  
  When I moved and plugged everything back into the TV, a lockout code showed up and now I am unable to change the channels. I do not have the manual anymore. Do you know what the code is?
  
  Thanks in advance!
  
  
• Re: JVC service or questions
  Shirley Clites
  - 5th Mar 2007 16:55
  Re: compact VHS Camcorder GR-AX880U
  My camcorder quit working. I have a blank screen-when I turn it on it has a short blinking message which says "lens cap" (the lens cap is off). It also shows the symbols for focus in the right hand corner. Can you help me fix this problem? Shirley
  
  
  • Re[2]: JVC service or questions
    JB38
    - 6th Mar 2007 8:55
    Your model has the potential to develop an image sensor defect, if you e-mail providing a "DIRECT" return e-mail address I will send on full details.
    
    
• Re: JVC service or questions Steven Sharrett - 6th Mar 2007 2:17
  Hello
  
  I have just purchaced an everio gz-mg77u. When I hook up to the computer the access light stays on, and the power to the camera shuts off. I followed the instructions to the letter. When I emailed jvc the tech told me I had the wrong usb cord. I went back to the store and they gave me a brand new camera and cord. It does the exact same thing. Please help
  Steven