JVC service or questions

Assistance with JVC product

If anyone has a question regarding a problem with thier JVC product (error codes, safeguard mode etc) write me for troubleshooting assistance. Please provide your model # if available and note this site so I can assist you better.

Stacy Sample
JVC Service & Engineering
Houston, Texas

Reply

• Re: JVC service or questionsRepair
  NTyson
  - 8th Mar 2007 23:43
  Hi,
  I have a JVC camcorder model GR-DX95U. It's serial number is 15820217. I cannot get an image on the screen. The screen only shows vertical lines in shades
  of brown. A friend of mine looked at it and thinks it has an internal problem,
  having to do with the CCD chip. If that is the case, how much would repair on
  my camcorder cost?
  
  
  • Re[2]: JVC service or questionsRepair
    JB38
    - 9th Mar 2007 8:31
    The repair to "THIS" model does not cost anything provided that you are the original purchaser of the device. If you provide a "DIRECT" e-mail address by clicking on my link I will send "FULL" info on.
    
    
• Re: JVC service or questions joe lyons - 9th Mar 2007 3:44
  condensation operation paused gr-50aa model
  
  
• Re: JVC service or questions
  Muhamed
  - 9th Mar 2007 6:01
  I was able to download video and make a small movie using my laptop with windows XP. I have since purchased a desk top with windows vista and although i can transfer the files (and even watch them) there is NO SOUND. The sound exists in the footage because i can watch it on the JVC Camera and hear the sound just fine. It's only when i transfer the file to my computer with windows vista. Do you have any advice for me? It's a JVC GZ-MG21u HDD.
  
  If you could help me, i would really appreciate it.
  Thanks
  Muhamed
  
  
• Re: JVC service or questions adrian avadanei - 10th Mar 2007 0:25
  i need to know if i can use my digital camera[model JVC GR-D250EK]as web cam ,and where can i find and download the drivers for it
  
  
• Re: JVC service or questions John - 10th Mar 2007 4:55
  Hi,
  I have a JVC GR-DVL1020EA video camera. It is now one month out of extended warranty and I am getting an E01 error and sometimes an E02. The tape is stuck and the tape loading mechanism is stuck halway in halfway out. I would just like to get my tape out. This is the second time it has done this, it was returned for repair during the warranty period. I was getting an E01 or E02 every now and then but removing the battery and reataching it worked. Now its totally stuck.
  
  Please help if you can. Is there maybe a way of manually removing the tape? I am not too concerned about the camera, I am buying a new one.
  
  Regards
  John
  
  
• Re: JVC service or questions
  Giovanni Sanchez
  - 10th Mar 2007 5:55
  Some how, my jvc camcorder (GZ-MG20U) does not transfer the video's audio to my computer either by usb cord or sd card..HEEEELP!
  
  
  • Re[2]: JVC service or questions
    Lilly
    - 6th Oct 2008 20:58
    Hi I have the same problem....help...did you find the
    
    
• Re: JVC service or questions Jason Tercek - 10th Mar 2007 16:20
  I have a JVC AV-32980. Out of nowhere the TV will not turn on. It would not respond to the remote or to simply pressing the ON button on the front of the TV. I checked the power and it was ok. Unplugged it and plugged it back in and nothing. Then, I happened to press the ON and MENU buttons on the front of the TV simultaneously and now the red ON light keeps blinking on and off and making a clicking sound (similar to the click normally associated with the TV turning on and off. Any ideas?
  
  
  • Re[2]: JVC service or questions
    JB38
    - 10th Mar 2007 17:51
    A flashing timer light on "ANY" JVC brand TV is simply an indication that the power unit has shut down because an internal fault has developed which requires investigation. (I believe the infamous C926 problem also applies to your model)
    
    
• Re: JVC service or questions Alice Emery - 10th Mar 2007 21:44
  Hello. My new JVC everio works fine but I can't get the edited video to burn from my PC (Windows XP format) onto DVD. It ejects the disc and then says there is no disc to burn onto.
  Thanks for any suggestions.
  
  
  • Re[2]: JVC service or questions
    JB38
    - 11th Mar 2007 16:46
    Have you tried burning anything else on your PC OTHER than from the camcorder, as that fault you mention suggests more of a PC burner problem rather than a camcorder one.
    
    
• Re: JVC service or questions Amanda - 11th Mar 2007 19:44
  I have a JVC car radio KD-S640. We can not set the time on it. Please can you email me instruction.
  Thanks
  Amanda
  
  
• Re: JVC service or questions Michele - 11th Mar 2007 20:34
  Convergence problem with AV65WP74. Is this something that I can repair or will I have to call in a repair teck?