Error Codes Assistance

Assistance for Error Codes

If anyone is having any kind of Error code, clean head icon or any other concern, contact me first before assuming you have a problem. My e-mail is Ssample@jvc.com.

I am knowledgeable and have helped many people past their error codes without service. Several things can cause error codes and I would be more than happy to assist you in determining if you do indeed have a problem and what options you have available.

Please refer to this site if you contact me. Thank you.

Stacy Sample
Service Coordinator
Houston, Texas

Reply

• Re: Error Codes Assistance melissa - 4th Sep 2007 2:11
  I own a hitachi dvd video recorder and it is not letting me eject the cd after formatting it. Is there something I can do to get the video cam open? thank you
  
  model #DZ-GX20A
  
  
• Re: Error Codes Assistance florin cristea - 4th Sep 2007 10:41
  I HAVE A SONY DCR DVD 105 E....CODE ERROR C:13:02. WHAT CAN I DO....PLEASE HELP ME THANK'S A LOT.
  
  
• Re: Error Codes Assistance Tiger Poston II - 4th Sep 2007 12:44
  I work in a Film School and I'm the Post Production Technician I work on all the decks and Macs. I have a Betacam SP Deck that won't take small or large tapes without giving me the Error21-1C1 on the front panel. I have taken out the cage assembly and tested the motor and it's working fine. Then I noticed the motor that engages the tape to the play head wasn't spinning at all. What do I need to do to get this thing working again without having to send it off for repair?
  
  Tiger Poston II
  Macintosh Certified/Post Production Technician
  NCSA School of Filmmaking
  Winston-Salem NC, 27127
  
  
• Re: Error Codes Assistance
  Bob Milka
  - 5th Sep 2007 4:38
  Hi,
  
  We have a Panasonic VHS/DVD recorder/player, DMR-ES46V. It's been great until tonight. We came home and the display was blank. We pressed the on button and it displayed a U61 readout. It will not successfully complete a turn on sequence or change format. The time readout is correct and matches our atomic clock. We have just been through a very difficult heat wave. Temps indoor were up to 98 degrees. Today though was much better. We're clueless. As of now we have left the recorder video output #6 which plays and displays all tapes and DVD's and are using just the cable/satellite video output #1. Thanks much for any thoughts you may offer. Thank you very much for being there.
  
  Cheers,
  
  Bob and Debbie
  
  
• Re: Error Codes Assistance Nanette G. Pla - 5th Sep 2007 11:19
  Dear sir,
  
  I've been using my kodak 330 camera. But one time i placed it in my shoulder bag and the bag was dropped with my camera inside. I did'nt notice my camera not working anymore until 1 week when i started to open it. It says lens error then changes to lens 22. Can it still be fixed/repaired? What shall i do? Please advice me sir, thank you.
  
  Nanette
  
  
• Re: Error Codes Assistance John Marshall - 5th Sep 2007 22:18
  Hello,
  
  I'm having the same problems with the error code. It spits out the CD. The jeep only has 20K oon it. I've tried a head cleaner so far.
  
  John M
  
  
• Re: Error Codes Assistance Les Mower - 6th Sep 2007 2:43
  Last weekend while changing a cd we received "cd err fo". Now we can't load, eject or play the cds. Is there any way to correct this. There seemed nothing out of the ordinary just prior to the problem.
  
  
• Re: Error Codes Assistance christiane - 6th Sep 2007 18:28
  Hi, I saw your message posted on a site called Pechorin.com and was wondering if you know what this code means for a Canon NP3225f copier, the code I get is E0. When I turn it on, it does nothing except blinks this error code??? Thanks,
  Christiane
  
  
• Re: Error Codes Assistance Ali Mehdi Abbas - 10th Sep 2007 13:27
  Hii...
  
  Betacam sp75 Error20 What? please...
  
  
• Re: Error Codes Assistance DAVID LLEWELLYN - 10th Sep 2007 19:46
  I own a SONY A 100 DIGITAL SLR CAMERA. Bought it new about five months ago.
  In the past few days, when I want to take a picture where "normal" or full daylight enters the lens I get an error code 0x5b that is 0x5b (that is a zero not an O)
  
  If I point the camera down towards a poor light source, it works absolutely fine, but as soon as I raise the camera and try to take a shot, the shutter closes very very slowly and then that error code comes up. But the camera self checking software comes up with OK every time.
  
  Any ideas please?
  
  Regards
  David Llewellyn