|
Start
Up
|
|
Error Codes Assistance
Stacy Sample - 22nd Jan 2004 19:31
Assistance for Error Codes
If anyone is having any kind of Error code, clean head icon or any other concern, contact me first before assuming you have a problem. My e-mail is Ssample@jvc.com.
I am knowledgeable and have helped many people past their error codes without service. Several things can cause error codes and I would be more than happy to assist you in determining if you do indeed have a problem and what options you have available.
Please refer to this site if you contact me. Thank you.
Stacy Sample Service Coordinator Houston, Texas
Reply
Pages: « 1 2 3 … 34 35 36 37 38 39 40 41 42 43 44 … 156 157 158 »
- Re: Error Codes Assistance
Courtney Singer - 31st Oct 2005 6:11 I have a MVC-FD75 Digital Camera, and It has worked good in the past, and yesterday it worked, but when I went to use it today no matter what disk I insert, I've tried about 50 disk it either says disk error, or no disk with the error code c:13:01 I just get no results when I use my manual, just wondered if you know what could have caused this.
- Re: Error Codes Assistance Adolfo - 31st Oct 2005 13:32
I Have a sony DSC S40,this camera giving me E:61:20 error, heva a solution this problema, without service?
- Re[2]: Error Codes Assistance
Fernando - 4th Jan 2006 8:02 ******I have the Error E:61:20 in my Sony DSC-S40.*******
*********Can you help me to solve this problem...********
- Re[3]: Error Codes Assistance Luis - 4th Jan 2006 8:30
oye con no mames
- Re[3]: Error Codes Assistance
universal despot - 16th Apr 2006 23:32 I had the same error code, and noticed the optical viewfinder wasn't changing with zoom. And just now, as I was searching for info, it started with minimal grinding noise, no error code, and the viewfinder was travelling. When I zoom fully, I hear the gears grind at the end of travel.
The problem must have been foreign material intruding in the viewfinder's path.
- Re: Error Codes Assistance Tony Williamson - 31st Oct 2005 22:50
I have a Sony VCR model SLV-790HF displaying on front 3L 10 71. Tape is in unit and will not play or eject. Any thoughts??
Much thanks......Tony Williamson
Tony.williamson@comcast.net
- Re: Error Codes Assistance
Sharon Karp - 1st Nov 2005 20:22 I am getting the code 06-6A7 and a tape is not ejecting!! Do you have any ideas how to get it out? I have a Sony UVW-1000.Thank you!
- Re: Error Codes Assistance Gary Archer - 3rd Nov 2005 23:39
Error codes 12, 22, 58 and 79
What would those mean?
- Re: Error Codes Assistance Gary Archer - 3rd Nov 2005 23:40
Error codes 12, 22, 58 and 79 on Sony 42" plasma (PFM-500A3WU)
What would those mean?
- Re[2]: Error Codes Assistance Alexander - 22nd Nov 2005 19:45
Hi,
I don't notice any error codes appearing on the LED readout however:
I have a problem with this monitor; after 3 - 4 hours of use, DVD, VHS, Cable all of the sudden the screen turns bright white with a negative image (similar to 35mm negative film).
The input connections are not loose; component - BNC for DVD, S-Video/ RCA audio for VHS, Composite - BNC/ RCA audio for Cable, & RCA audio out to reciever. The audio patch is controlled by a Radio Shack audio/video switcher VHS/Cable.
The speakers are connected firmly with Monster flat cable, speakers are passive (not powered)
I have tried to solve the problem by turning the monitor off and unplugging it for a while then plugging it back in and turning it on.
I tried the reset sequence also.
I checked the status page and everything seems fine, fan, temperature etc. 6,800 hours use.
This 'rebooting' sequence is somewhat a temporary solution, the symptom returns after 3 - 4 hours.
The monitor is in a well ventilated area, on the stand provided.
It is plugged into a Monster line conditioner for protection against spikes, RF noise etc.
Could you advise?
Many thanks,
A.
- Re: Error Codes Assistance
Kenneth - 4th Nov 2005 4:17 i have a minidv camcorder model number gr-d70u and it always prompts the notice "condensation, operation paused" even though it is very hot outside and there is a very small possibility that it will get condensation in florida. anyway, i hope you could help me thank you.
- Re[2]: Error Codes Assistance Mo - 20th Dec 2005 19:44
Kenneth...who is the manufacturer of that cam?? One more thing...Florida is an extremely humid area, hence, a high condensation problem if used outdoors...
Mo
- Re[2]: Error Codes Assistance
randy - 10th Nov 2006 21:03 I'm having the same condensation issue I live in new mexico. I had it in my camera bag. It's model no GR-D70U JVC please help!! thanks
- Re: Error Codes Assistance
Dale - 4th Nov 2005 16:40 I work as a vided/graphics instructor and have 15 sony camcorders. I have had them in for repairs with a 31:22 error code. In fact, I have one in now. What can I do to solve this problem here at school? Also, I have a sony Mavica MVC-FD75 with a 61:10 error code. Is there anything I can do? Thanks, Dale
- Re: Error Codes Assistance
R. HAMM - 4th Nov 2005 22:43 My wifes car 1997 SSEI Bonneville Pontiac Bose stereo is giving a error code of E20, if you could help it would be appreciated.
- Re: Error Codes Assistance Unal SOYLEMEZOGLU - 5th Nov 2005 19:23
Hi Mr. Stacy
ı am very happied to introduce with you via internet
I lived the Houston Texas in 1994 , attended to the English Course at Rice University.
By the way ı bought a sony trv355 from Dubai in 2003 , just 5 or 10 times used to camera now ı am getting error code C31:30 and flashing eject sign on the screen it is impossible to use camera anymore please would you help me tomorrow my dauhter's birthday..
thank you very much for your help
Unal soylemezoglu
IZMIR TURKIYE
|