Re: JVC error codes assistance

I am available to assist anyone who is experiencing any kind of error code or icon. Please contace me at Ssample@jvc.com with your concern and I will see if I can assist you in troubleshooting your problem. It may or may not actually be your camcorder.
Please refer to this site when you e-mail me. I look forward to assisting you. :)

Reply

• Re[2]: JVC error codes assistance Allen Bott - 12th Dec 2006 4:52
  The camcorder says that the lens cap is on when it isn't and at the bottom of the screen flashing there is what looks a portrait icon with back and forward triangles to the right and then what looks like a mountain. Any ideas? I can view tapes I just can't record.
  
  
  • Re[3]: JVC error codes assistance
    Lee
    - 16th Dec 2006 4:31
    I can't believe I just read this post. This is EXACTLY what started happening to our camera on 12/10!! We can't record and it has the same symbol and lens cap warning. Any suggestions???
    
    
    • Re[4]: JVC error codes assistance Allen - 27th Dec 2006 0:55
      I called JVC's support number. Since it is a defective part they will fix it for free. You have until 10/2007 to send it in.
      
      
• Re[2]: JVC error codes assistance Joan - 13th Dec 2006 16:24
  My camcorder is stuck on E06 saveguard mode. I have removed and reattach battery but it is still not working.
  Any ideas.
  Thanks Joan
  
  
• Re[2]: JVC error codes assistance Kamlesh C. Patel - 21st Dec 2006 16:49
  Hi,
  
  I'm getting E04 error message suggesting to ejact and replace the tape. I have also lost some recording from last week which was about 1 hour. Tape is blank at this time. I kept getting E04 message while I was recording and I' getting it now while playing the tapes.
  
  Any help from you is really appreciated.
  
  Thanks,
  Kamlesh C. Patel
  610.925.1164
  Kamlesh.Patel@GenesisHcc.com
  
  
• Re[2]: JVC error codes assistance Rick L Murphy - 2nd Jan 2007 18:27
  I have a JVC gr-d70u that is giving me an E04 error code. Says it is in the safe mode. Remove and reinsert tape. the basket goes in ok without a tape in it. but whan I put a tape in, it will not go in.
  
  
• Re[2]: JVC error codes assistance
  Sanju
  - 8th Jan 2007 18:35
  i have jvc camcorder, the model number is GR-D244US, its giving a condensation error, and tape isn't ejectin, how do i get it fixed?
  
  
• Re[2]: JVC error codes assistance
  J Seal
  - 9th Jan 2007 14:36
  My JVC video camera model Gr-DVP-1E has got a fault message on ths screen saying remove and replace the battery E06, i have done this and even tried it with the mains power lead in and the fault still shows, i have also noticed that the tape will not eject, i have had only 4 hours recording time with this camera and would not expect to have any problems with it yet.
  
  Can suggest would i need to do to resolve the problem
  
  Thanks
  
  
  • Re[3]: JVC error codes assistance AJ - 20th Sep 2007 5:05
    Did you ever get a solution for this? Mine is now doing the same thing...
    
    
• Re[2]: JVC error codes assistance Mike - 14th Jan 2007 18:48
  Good morning,
  
  I have a JVC VHS-C GR-AX730 compact VHS. I have an old tape inside the unit. The unit will not eject the tape. I am receiving error code E02, which I think is the Supply Reel Error. I don't use the unit any longer and really want the tape inside. How can I retreive the tape without harming the tape. I don't care about the unit. Any help would be greatly appreciated.
  Thanks,
  
  Mike
  
  
• Re[2]: JVC error codes assistance Doug Lomas - 16th Jan 2007 20:38
  JVC Camcorder GR-SX90
  
  Sometimes: E 04 Flashes on screen when in camera mode then I cannot activate camera
  
  When, (by switching on and off a few times) I am able to eliminate the E 04 the camera records with no indication of a problem in the viewfinder window
  
  But; when in PLAY mode or in VCR adaptor playback the picture deteriorates in different ways as follows
  
  1 A black "snowstorm" on a white background. (Full screen)
  
  2 a horizontal half picture with half black snowstorm on white
  filling the rest of the screen
  
  3 a part picture horizontally centered with a 1/4 black snowstorm
  on white top and bottom of screen.
  
  NO LOCAL REPAIR CENTER WITHIN 100 Miles
  
  Is this minor or major problem ??? I have about 30 unused mini cassettes Super VHS and standard to consider before abandoning my camcorder
  
  D.Lomas 360 671 5768
  
  
  • Re[3]: JVC error codes assistance
    ernman
    - 21st Jan 2007 1:48
    I have these error codes on an older model JVC MiniDv GRL-805U model. I started getting the error codes this past CHristmas. On my unit I read where you put the tape in, close the door, then.....smack it. Don't beat it, just smack it. Seems this MiniDv camcorder has a mechanical issue. Believe it or not, it started working after giving it a smack.
    
    
• Re[2]: JVC error codes assistance John Kettle - 26th Jan 2007 15:41
  Hi...I have error code EO1 that appears on the screen and I can't get the tape transport to open. Do you know what the code means? Thanks...John
  
  
• Re[2]: JVC error codes assistance David G. Kemp - 13th Feb 2007 3:38
  I have a JVC-AX7 camcorder that has the code E01 come up after a few seconds or immediatly after pushing the record button. I have changed the battery and used the power adapter, which made no difference. When it powers up, I can hear the motor turning, but the counter does not display. What could be the problem and what does "E01" mean exactly. Thank you.