Re: JVC error codes assistance

I am available to assist anyone who is experiencing any kind of error code or icon. Please contace me at Ssample@jvc.com with your concern and I will see if I can assist you in troubleshooting your problem. It may or may not actually be your camcorder.
Please refer to this site when you e-mail me. I look forward to assisting you. :)

Reply

• Re[2]: JVC error codes assistance Dauri - 4th May 2006 1:54
  Hello,
  I have an JVC Cam recorder and the tape got stuck in it, and now it shows ERor Code E01. Remove and Reatach battery and Unit in safeguardmode.
  What do I need to do ?
  I need it real soon.. for monday.
  i would appreciate if you could help me
  
  
• Re[2]: JVC error codes assistance
  David Ower
  - 1st Jun 2006 4:21
  I have a JVC GR-DVM90 digital vidio camera. I turn it on and try to do anything with it involving rolling of tape, playing, taping, fast forward or backword. When that is attempted, the unit hums for a second, then displays this error message: "E04 Unit in Safegard mode" Then it shuts off.
  
  The manual's trouble shooting sections says I should try removing the battery/power supply for several minutes. Hopefully that will allow the "brains" of the unit to reset and return to operation. I tried several times. The manual says that if multiple failures of resetting are experienced, contact a JVC dealer for assistance.
  
  The dealers know very little. JVC has a Customer Service phone number. They said I could send it in and for a $70 fee they will evaluate the unit. Repair could cost much more.
  
  It's about a 4 year old unit. New updated versions of such a camera are very competatively priced. I rarely used the camera. Only six tapes have been filled in 4 years. I use the still camera feature more. What to do.
  
  David
  Palm Springs, CA
  
  
• Re[2]: JVC error codes assistance Ade Hayes - 14th Aug 2006 12:44
  I am getting an error 15 on my JVC KD-GT7. Is this something you can help with I know it is an older car audio reciever. But your assistance would be greatly appreciated.
  
  
• Re[2]: JVC error codes assistance ARIE - 21st Aug 2006 22:19
  WE ARE SEEING AN ERROR CODE "E04" APPEAR. WHAT IS THIS CODE'S MEANING?
  GR-DVX4
  
  
• Re[2]: JVC error codes assistance clive schless - 27th Aug 2006 11:50
  I have a JVC DVC Modle Number GRD21EK and have had a condensation error running for over a year. It comes and goes but is becoming more and more of a nuisance. It also seems to occure mainly during the summer (?). I eventually cleaned the heads last autumn and it improved for a while but has come back with a vengence.
  I read on the Pechorin's newsgroup that this is a HD error. If this is the case should JVC carry out repairs gratis? I was quoted £200 for a repair but at this price I might as buy a new one - perhaps a Sony!
  Is there anybody in the Hertford area who might be able to fix this for me?
  
  
• Re[2]: JVC error codes assistance arie - 17th Oct 2006 1:08
  EO4
  
  
• Re[2]: JVC error codes assistance arie - 17th Oct 2006 1:09
  EO4
  
  THANKS
  
  
• Re[2]: JVC error codes assistance marque - 19th Oct 2006 3:05
  I have a JVC 250X one day after Filming.. i get a E04 error "Unit in safeguard mode" and reattach battery" i have tried new batteries and tapes any idea? i get the error even if i use AC power adapter.
  
  marquue
  
  
• Re[2]: JVC error codes assistance Pamela Foard - 9th Dec 2006 11:15
  I have a JVC 250x that I dropped. It worked for about one minute, the screen became grainy (while not in record mode), then shut down completely with the tape still inside. Is there a way to get the camcorder to turn on, if only to retrieve the tape without forcing it?
  
  Thank you.
  
  
• Re[2]: JVC error codes assistance
  Roger
  - 10th Dec 2006 17:50
  I have a JVC GR-D31U. The only problem I'm having is that it's not recharging the battery. I purchased a new battery, so I know that's not the problem. The LED that's supposed to flash while charging doesn't flash. I've ordered a separate charger, but it would be nice to have the camera work properly. Is there a "master reset" button or anything fairly simple that I might try?
  
  Thanks!