I have a JVC GR-DX77U. When I turn it on I get "condensation, operation paused" message. What can I do to make this error message go away?

I'm getting the error code 7302 VTR warning (Hard) on my JVC DV 500U. Any I idea how to fix?

Dear Sir I have the problem of error 03 and it keeps coming upin safety mode I have tried all suggestions of taking out the battery and replacing it and tapping the camcorder several times keeping it in a warm place as it came up once with condensation that problem is resolved but i have tried a headcleaner and this also does not work have youany suggestions please My camcorder is a JVC GR-D23EK Lookforwardto your expertise Heres hoping I can find the solution Thankyou Ken Borrett

Hi Stacy, My JVC GR-DVM50 mini dv camera has the dreaded 04 error message. I haven't been able to find any info online for what I may try to do to remedy the situation. Can you help?? Thanks! Winston

Ite i have a jvc cd changer ch-x99 and it changes between error 2 and error 3 any ideas on how to solve this plz. Cheers Rob

Got my camcorder fixed by JVC so it no longer displays the "LENS CAP ON" error but now it is displaying "PAUSED DUE TO CONDENSATION" or something similar. Have cleaned the sensor with Q tip and alchol and done a hardware reboot by opening it and pulling the plug from the motherboard - ANY HELP or Suggestions appreciated

hi ther i get an error code E06 come up on my jvc camcorder gr-sxm48 it says E06 unit in safeguard mode remove and reattach battery could you please tell me whats the matter with it or what i have got to do to get it working proply again oh where u put your tape that wow open either thanks mrs k holmes

hi ther i get an error code E06 come up on my jvc camcorder gr-sxm48 it says E06 unit in safeguard mode remove and reattach battery could you please tell me whats the matter with it or what i have got to do to get it working proply again thanks mrs k holmes

I bought my JVC GR-DVL160EG 2nd hand and it displayed the E03 failure. The previous owmner had placed the tape upside down, which gave now this failure. I discovered that the problem disappeared after shortcutting the sensor. That is by shortcutting the first two lines of the flat cable at the bottom, marked with CN572. These lines are facing to you, on the outside. I did not make the shortcut in the cable but just by putting a very little bit of solder between the two first connections on the print. Not a very good solution, but it worked. Do it AT YOUR OWN RISK! Tip: first try to see if it works by touching and shortcutting the two lines with a metal pin like a small screwdriver or pincet.

My JVC video camera model Gr-DVP-1E has got a fault message on ths screen saying remove and replace the battery E06, i have done this and even tried it with the mains power lead in and the fault still shows, i have also noticed that the tape will not eject, i have had only 4 hours recording time with this camera and would not expect to have any problems with it yet. Can suggest would i need to do to resolve the problem Thanks